ET-31
- 【PLUG-AND-PLAY, NO WIFI NEEDED】 Simply plug into a standard 120V outlet, connect your heating or cooling device, and set your target temperature with the + / – buttons — no app, no WiFi, no pairing required. The large LED display shows real-time temperature clearly, and the three-button interface makes setup straightforward for anyone. Short press the middle button to power on/off; long press “+” to switch °F/°C instantly. Perfect for users who prefer reliable, standalone control without smart-home complexity.
- 【HEATING OR COOLING DUAL MODE, SINGLE RELAY OUTPUT】 Select heating mode (HEA) for seedling mats, fermentation heaters, or reptile enclosures; select cooling mode (Coo) for small fridges, fermentation chillers, or greenhouse ventilation. Heating equipment up to 1200W (10A max); refrigeration/cooling equipment up to 480W (4A max) at 120Vac 60Hz. This is a single-relay device — it controls one device at a time, either heating OR cooling. Adjustable temperature differential (1–30°F, default 3°F) for both modes.
- 【HIGH-PRECISION NTC SENSOR, WIDE TEMPERATURE RANGE】 Industrial-grade NTC 10K/3950 temperature sensor with a 6.56ft (2m) waterproof probe delivers 0.1°F/°C display resolution below 100°F/°C. Measurement range: -22°F to 210°F (-30°C to 99°C); setpoint adjustable in 1°F / 0.5°C increments. Sensor calibration function (±10°F) lets you fine-tune accuracy for your specific environment. °F and °C switchable with a long press of the “+” key.
- 【BUILT-IN SAFETY & PROTECTION FEATURES】 Compressor delay protection (1–10 min, default 3 min) prevents frequent cycling and extends fridge/compressor life — the blue indicator blinks while waiting. High-limit (default 200°F) and low-limit (default -12°F) temperature alarms with a blinking red/blue indicator and “ALA” + “HL”/”LL” on screen alert you to out-of-range conditions. Built-in countdown timer (long press “-” to set) auto-shuts off the device when time expires. Factory reset available to restore default settings.
- 【WIDE APPLICATIONS, INDOOR USE ONLY】 5ft (1.5m) power cord, no wiring required. Perfect for seed germination, seedling heat mats, plant propagation & rooting, home brewing, fermentation (kombucha, yogurt, sourdough, kimchi), reptile & amphibian enclosures, small greenhouses, incubation, aquarium heaters, and any temperature-critical project where simple, reliable control matters. Keep away from children; do not use with extension cords or power taps to reduce electric shock risk; keep the unit dry and indoors only.
ET-31W
- 【WIFI SMART APP REMOTE CONTROL】 Built-in 2.4GHz WiFi connects to the Warmme APP (iOS & Android), allowing you to monitor real-time temperature, adjust setpoints, and switch heating/cooling modes from anywhere. Supports OTA firmware upgrades so your device stays up to date without replacing hardware. The WiFi icon on the display clearly shows connection status; auto-switches to Hold mode if the network drops, ensuring uninterrupted temperature control.
- 【HEATING & COOLING DUAL MODE, SINGLE RELAY OUTPUT】 One relay output supports either heating OR cooling mode (selectable via menu). Heating equipment up to 1200W (10A max); refrigeration/cooling equipment up to 480W (4A max) at 120Vac 60Hz. Plug-and-play design — simply plug your heater, seedling mat, fermentation heater, or small fridge into the outlet socket, set your target temperature, and the controller automatically powers the device on/off. Ideal for growers, brewers, and hobbyists who need one device to manage either heat or cold.
- 【HIGH-PRECISION NTC SENSOR, WIDE TEMPERATURE RANGE】 Industrial-grade NTC 10K/3950 temperature sensor with a 6.56ft (2m) cable delivers 0.1°F/°C display resolution below 100°F/°C. Measurement range: -22°F to 210°F (-30°C to 99°C); setpoint adjustable in 1°F / 0.5°C increments. The sensor calibration function (±10°F) lets you fine-tune accuracy for your specific environment.
- 【ADVANCED PROTECTION & PROGRAMMABLE FEATURES】 Weekly scheduling (7-day individual or 5+1+1 mode) configurable only via the APP, with 4 temperature stages per day. Built-in countdown timer auto-shuts off the device. Compressor delay protection (1–10 min, default 3 min) prevents frequent cycling and extends fridge/compressor life. High-limit (default 200°F) and low-limit (default -12°F) temperature alarms with a blinking indicator and “ALA” on screen alert you to out-of-range conditions. °C/°F switchable, factory reset available.
- 【PLUG-AND-PLAY, WIDE APPLICATIONS】 5ft (1.5m) power cord, indoor use only. No wiring required — plug into a standard 120V outlet and connect your equipment. Perfect for seed germination, seedling heat mats, plant propagation & rooting, home brewing, fermentation (kombucha, yogurt, sourdough), reptile & pet enclosures, greenhouses, incubation, and small-scale temperature-critical projects. Keep away from children; do not use with extension cords or power taps to reduce electric shock risk.


















Reviews
There are no reviews yet.