- Designed to prevent ice buildup, known as ice dams, from forming on roofs and in gutters and downspouts. Protect your roof from damage and leaking, keep the water flowing in gutter & downspouts. When properly installed and operated, this product creates a path for melted snow or ice (“melt water”) to drain from the roof to the ground.
- Used for Metal or plastic gutters/downspouts, Inclined roofs Roofs with noncombustible shingles (Ex.: asphalt shingles) that meet national building codes. Different lengths are available; Suitable for most roof and gutter configurations. HIRD roof heat cable cannot be used on slate, stone, metal and ceramic roofs.
- Test the cable before installation. Uncoil the heat cable completely so it does not touch, cross over or overlap on itself. Do not plug in the cable until it has been completely uncoiled. Plug cable in, and in approximately few minutes, it should feel slightly warm to the touch. Then unplug the cable.
- Both CSA and ETL approved. 6 ft 18/3 cold lead with plug ; 5 watts/ft. Pre-assembled, ready to install, no maintenance required; Easy instruction manual, clips and spacers are included.
- Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket. 100% screen rate with the Aluminum foil and tinned copper braid. More safe and more healthy. Three year limited warranty- If you are not completely satisfied with HEATIT heating cable, please don’t hesitate to contact us in any time.
- Sufficient heating cable inventory in warehouse of Chicago area. Normally order are shipped within 7 days after order released. Expediting delivery service is available.
| SIZE | 20-feet, 30-feet, 60-feet, 80-feet, 100-feet, 120-feet, 160-feet, 200-feet, 240-feet |
|---|
SPECIFICATIONS
Rated Voltage:120 VAC
Output:5 W/ft
Min. Installation Temp.: 0 ℃
Cold lead : 6 ft length 18/3 with plug
This kit is only designed for use on:
-
- Metal or plastic gutters/downspouts
- Inclined roofs
- Roofs with noncombustible shingles (Ex.: asphalt shingles) that meet national building codes
Do not use this kit on any other type of roof, gutter and downspout, including:
- Roofs with wooden shingles
- Rubber or rubber membrane roofs
- Composite (tar and gravel) roofs
- Wooden gutters or downspouts
- Flat roofs
- HIRD cable cannot be used on slate, stone, metal and ceramic roofs.
- These types of roofs require special installation or the use of a self-regulating cable.
- If you are not clear of the material used for your roof, gutters and downspouts, call a professional roofing contractor.
| HIRD | JHSF1 | JHSF1-CT | |
| Cable Structure | Regular (Constant wattage) | Self regulating | Self regulating |
| Can be overlapped, crossed without overheat risk | No | ✓ | ✓ |
| Output @10°C | 5w/ft Constant | 10w/ft | 10w/ft |
| Length of cold lead | 6ft | 3ft | 6ft |
| Outter Jacket | PVC | PE | Fluoropolymer |
| Can be used on flat roofs,metal roofs, asphalt roofs, stone Ceramic roofs and more | No | ✓ | ✓ |
| Can be installed on inclined roofs, Metal or plastic downspouts | ✓ | ✓ | ✓ |
| Output automatically adjusted to ambient temperature | No | ✓ | ✓ |
FAQ
Can this be used for pipe?
No, it’s only designed for roof. HISD,JHSF,JHSF1,JHSF1-CT can be used for pipe.
Does this have a built in thermostat?
For HEATIT HIRD roof deicing heating cable, there is no built in thermostat.
Can this product be installed onto a roof where there is already snow and ice?
There is no ice or snow on the roof. This cable was designed to make a clear path for snow and ice that is already melted.To prevent future ice dams, you can install the de-icing cable once the ice and snow have melted and before the next winter season. Do not use this cable to melt snow and ice that has already formed on your roof or in your gutters or downspouts, as you would not be able to attach the cable properly with the clips.
Shipping
* On hand inventory in US and Canada warehouses. It normally takes 1-3 business days for us to process your order. Please note that this does not include holidays and weekends.
* Shipment normally takes 5-8 business days to arrive, but can take up to 12-15 business days around busier periods such as holidays etc.
* Shipping time is estimated and commences from the date of shipping, rather than the date of the order, and can take longer than expected date due to an invalid address, customs clearance procedures or other causes.
* Please submit a ticket within 60 days of shipment if the package does not arrive in time, our representative will get back to you within 24 hours. Note that overdue requests may not be accepted.
24 reviews for HEATIT HIRD Roof & Gutter De-icing Cable
Add a review
You must be logged in to post a review.
Related products
pipe heating cable
HEATIT 8JHSF Roof and Gutters Heating Cable with 10ft Lighted Plug Heavy-Duty Heat Tape, 120V 8W/ft
pipe heating cable
HEATIT JHSF1-CT Self Regulating Pre-assembled Pipe Heating Cable
pipe heating cable
HEATIT 8JHSF1 Heat Tape for Water Pipes Roof and Gutters Heating Cable with 10ft Lighted Plug
Constant wattage
Reed –
Mother nature dumped a lot of snow around the Boise area this winter and it created lots of issues. A ice damn was starting to develop on my roof that caused concerns. Once I installed this product, the ice damn was no longer an issue. Great product. Highly recommended.
pegasus9 –
This is the first time using this type of product and it seems to be working well. We got a lot of snow so far this year and you can see where it is melting it off the roof. It isn’t real hot so it takes a while to melt through thick snow in which it keeps the ice build up to a minimum. But all in all it’s doing it’s job. I will buy a longer cable next time. It doesn’t reach as far as you think it will due to the wavy pattern that it must be laid.
John E. –
I purchased these for an investment property, mobile home roof that had issues with ice damn on the north side. We have had a mild snow so far and the cables clearly melted the snow around them and helped run the water off the roof.
seth –
Like how easy it was to install. No dislikes.
Kris Fehring –
Works well. Solved our ice problem!!!
Michael E Pfeiffer –
There are plenty of roof/shingle clips and cord spacers. I should have purchased the next longer length.
Quality Services WNY –
Work extremely well
TERESA MOSES –
This product worked perfect. What I liked was the length of the cord from the heat to the extention cord.
jk –
This cable has been in place for a month now and is working well.
K. Rose –
It melted all the ice in our eves this winter!
ken hagstrom –
easy install to keep ice off roof edge
Fance 64 –
Great for keeping an ice free front porch step!
Lisa –
They were very easy to install and work great although we haven’t had a lot of snow yet, they have worked well on the couple of inches so far.
davidl –
Exactly what I needed. We will see how it works when it snows. Hopefully, it will keep the ice away.
Robert Bearup –
A+++++
R.Dogg –
Used along a gutter and shingles that dammed up with ice. So far so good. Had to get a thermo controlled outlet so it wasnt on all the time
Rose –
great price product as described fast shipping
irish57 –
Perfect fit , good instructions.
Kili19341 –
I’ve used this for 2 winters now and its done it’s intended job. I would buy again.
Patricia S. –
We like that it is long enough to run the entire front gutter, put some up on the roof valley and run down the downspout.
JnH Conklin –
It works great for keeping the ice dams melting away
R. Hom –
Works as advertised
Only14mo –
Works great and so easy to install
Ali Northwest Montana –
I live in Northwest Montana and we get a crap ton of snow this is my 2nd one and will be buying more . Very easy to install.